Current Location:首页 > Product center > Air cooling module (screw) cold water heat pump unit > Air cooled modular hot and cold water unit > LFD type Shanghai plant with large energy-saving and environmental protection hot and cold air conditioning unit
Brief description:The main components of large energy-saving and environmentally friendly cold and hot air conditioning units used in Shanghai factory, such as refrigeration compressors, filters, etc., are all made of * products。The unit has a variety of automatic protection compared with other similar products, with high efficiency, compact structure, smooth operation, easy operation, beautiful appearance, long service life and so on。The unit uses high-strength steel as the frame, novel appearance, simple and reasonable mechanism, easy installation, internal use of anti-corrosion materials, effectively increase the service life of the product。
Product classification
Product CategoryRelated article
Related ArticlesDetailed introduction
品牌 | ZHONGYOU/ Zhongyou |
---|
LFDCold and hot air conditioning unit
:谷伟 :
Product features:
The main parts of this product, such as refrigeration compressors, filters, etc., are made of * products。The unit has a variety of automatic protectionCompared with other similar products, it has the characteristics of high efficiency, compact structure, smooth operation, easy operation, beautiful appearance, long service life and so on。
1) Shape structure
The unit uses high-strength steel as the frame, novel appearance, simple and reasonable mechanism, easy installation, internal use of anti-corrosion materials, effectively increase the service life of the product。
2)功 能
本机It has the function of cooling and dehumidifyingWhen the humidity is relatively large, the dehumidification function is used, and the ventilation function is used when the humidity is small。This can not only meet the requirements of humidity, but also achieve the effect of cooling and energy saving
3)配 件
The compressor and main accessories are used in the product, through the scientific and reasonable optimization design of the refrigeration system, to ensure the normal operation in different environments。It has overcome the shortcomings of insufficient dehumidification of domestic models and high failure rate of units with frequent start-up。At the same time, it also improves the service life of the product。
4)控 制
The unit adopts microcomputer control, which can automatically start and stop according to the relative humidity set by the user, with high precision, good reliability, beautiful appearance and easy operation。
5)保 护
The unit has temperature and humidity display, fault display and other functions。Equipped with overload, short circuit, lack of phase, overheating, high pressure, low pressure and other protection, and fan, fire valve chain protection。
Working principle and flow chart
2, indoor wet air through the surface of the evaporator, because the evaporator temperature is lower than the dew point temperature of the wet air, the water vapor in the air will condense out, accumulate in the water tray, discharged by the water pipe, the moisture content of the air decreases。After dehumidification, the wet air is heated up through the air-cooled condenser, and its relative humidity decreases, so as to achieve the purpose of drying the ambient air。
LFD13Cold and hot air conditioning unit
型号 性能 | LFD13N/LFD13W | |||||
Air conditioning unit performance | Refrigerating capacity | kW | 12.9 | |||
104kcal/h | 1.11 | |||||
Energy regulation | % | 100,0 | ||||
风 量 | m3/h | 3000 | ||||
External residual pressure | Pa | 150 | ||||
Unit noise | dB(A) | 64 | ||||
Temperature control range and accuracy | ℃ | 18~25℃, 精度±2.0℃ | ||||
电 源 | 380V, 50Hz, three-phase four-wire system | |||||
Total unit capacity | kW | 10.72 | ||||
Refrigeration system | compressor | 类型 | Fully enclosed scroll type | |||
数量 | 1 | |||||
Nominal input power (kW) | 3.8 | |||||
refrigerant | 类型 | R22 | ||||
Throttling mode | Thermal expansion valve | |||||
evaporator | 型式 | Copper tube sleeve aluminum sheet type | ||||
Fan system | 风机 | 类型 | Low noise centrifugal external rotor | |||
数量 | 1 | |||||
Power (kW) | 0.8 | |||||
filter | 类型 | 初效 | ||||
Exterior dimensions of indoor unit | Length (mm) | 980 | ||||
Width (mm) | 600 | |||||
Height (mm) | 1700(2000) | |||||
重量 | kg | 270 | ||||
Outdoor unit | 型 号 |
| FN18(A) | |||
数 量 | 台 | 1 | ||||
功 率 | kW | 0.12 | ||||
Overall dimension | mm | 950*360*1230 | ||||
Connection size | 液管 | mm | 12 | |||
汽管 | mm | 22/12 | ||||
重 量 | kg |
|
注:1.The data in square brackets are the parameters of cowl type units。
2.For details about outdoor unit parameters and the dimensions of indoor and outdoor pipes, see the corresponding data in the FN table of the sample。
3.The L-type unit has no heater and no heat。
Product consulting
Scan wechat